This section is aimed to assist in the development of RTK.
Download and compilation
The RTK source code can be retrieved from RTK's git repository using the following command:
git clone firstname.lastname@example.org:SimonRit/RTK.git <sourcePath>
In order to compile RTK you need the following third party software:
CMake is a family of tools designed to build, test and package software.
You can download pre-compiled binaries and the source code here or via git:
git clone git://cmake.org/cmake.git
Installation instructions are available, here.
CMake is used to build ITK and RTK, among other platforms.
ITK is an open-source, cross-platform system that provides developers with an extensive suite of software tools for image analysis.
You can download the source code, here or via git:
git clone git://itk.org/ITK.git <sourcePath> git checkout v3.20.0
Create a binary directory, i.e. itk-bin, get into it and run CMake:
mkdir itk-bin cd itk-bin ccmake ../itk make
Note: it is preferable to use the following options for registration:
Set ITK_USE_REVIEW to ON Set ITK_USE_OPTIMIZED_REGISTRATION_METHODS to ON
Gengetopt is a tool to write command line option parsing code for C programs.
- Windows, you can download the binary, here.
- Linux, you can download the source code, here
or via git:
git clone git://git.sv.gnu.org/gengetopt.git
mkdir gengetopt-bin cd gengetopt-bin ../gengetopt/configure make sudo make install
Last step is to compile RTK and we also use CMake. Compilation process as follows:
mkdir rtk-bin cd rtk-bin ccmake ../rtk make
The API of the toolkit can be found, here.
The description of the geometry is based on the international standard IEC 61217 which has been designed for cone-beam imagers on isocentric radiotherapy systems but it can be used for any 3D circular trajectory. The fixed coordinate system of RTK and the fixed coordinate system of IEC 61217 are the same.
If you want to join our mailing list, just click on the link and fill in the subscription form: